VIOFO OP100 OBD-II Power Cable

$85.99

Plug-and-play parking-mode power for VIOFO dash cams — straight into your car's OBD-II port, no hardwiring required.

Plug-and-play via the OBD-II port
No hardwiring — fit it in minutes
Battery protection built in
3H / 24H / Always-On parking timer
ON/OFF switch + 12V/24V

Best for: drivers who want easy parking-mode recording without paying for a hardwire install.

Overview

The VIOFO OP100 OBD-II Power Cable unlocks parking mode the easy way — it plugs straight into your car's OBD-II port for constant power, with no fuse-box hardwiring required.

Who it's for

For drivers who want parking-mode recording without the cost or hassle of professional hardwiring. If your car has an accessible OBD-II port, this is the fastest way to get continuous parked recording.

Plug-and-play parking mode
No hardwiring
Battery protection
Timer + switch

Pros & cons

Pros

Plug-and-play parking mode via the OBD-II port — no fuse-box wiring
Low-voltage protection helps protect your car battery
3H / 24H / Always-On parking timer options
Handy ON/OFF power switch
Works on 12V and 24V vehicles

Worth knowing

Your car needs an accessible OBD-II port
Draws from the main battery, so the cut-off setting matters
For the tidiest install, hardwiring (HK4/HK6) is still neater
Designed for compatible VIOFO dash cams

A closer look

Parking mode without hardwiring

Hardwiring means finding the right fuse and tapping into your loom. The OP100 skips all that — it plugs into the standardised OBD-II port under your dash to deliver constant power for parking mode in one connector, with a handy ON/OFF switch.

Protects your battery, your way

Built-in low-voltage protection stops the cable draining your battery too far, and the 3H / 24H / Always-On timer lets you choose how long parked recording runs after you leave the car.

Compatibility

The OP100 provides parking-mode power for compatible VIOFO dash cams via the OBD-II port. It suits vehicles with an accessible OBD-II port (most modern cars). Ask us to confirm it suits your VIOFO model and vehicle.

Installation

Plug the OBD-II connector into your car's diagnostic port (usually under the steering column), route the lead to your camera and choose your parking timer. No fuse-tapping required.

Specifications

Connection	OBD-II port (plug-and-play)
Enables	Parking-mode power
Protection	Low-voltage cut-off
Timer	3H / 24H / Always On
Switch	ON / OFF
Vehicles	12V / 24V
Warranty	24-month Australian warranty

Frequently asked questions

Do I need an auto electrician?

No — the OP100 plugs straight into your OBD-II port, so most people fit it themselves in minutes.

Will it drain my battery?

It has low-voltage protection that stops drawing power before your battery gets too low, plus a 3H/24H/Always-On timer to control parked recording time.

Where's the OBD-II port?

Usually under the dashboard near the steering column. Your owner's manual shows the exact location.

OBD-II or hardwire kit?

OBD-II is faster and easier to fit; a hardwire kit (HK4/HK6) is tidier and frees the OBD port. Both enable parking mode.

Why buy from The Dash Cam Co

Authorised VIOFO reseller in Australia — genuine stock with an exclusive 24-month Australian warranty, plus your full rights under Australian Consumer Law
Same-day dispatch before 1pm AEST, Monday to Friday
Free Express Post Australia-wide on orders over $200
Honest, expert local support — we'll help you choose the right kit and accessories

Add the OP100 to your cart to unlock parking mode the easy way, or browse the VIOFO range, or ask us for help.