Thinkware MULTSC 1080p Side External Camera
Thinkware MULTSC 1080p Side External Camera
The Thinkware MULTSC is an IP68 waterproof Full HD side camera that covers the blind spots front-and-rear cameras miss — the side channel for a Thinkware multi-camera system, mountable on the left or right of the vehicle.
- 4WD & touring
- Trucks & vans
- Blind-spot coverage
- Weatherproof IP68
What it does
- Mounts on the front guard or side of the vehicle to record the blind spots along the flanks — vital for wide 4WDs, trucks and vans.
- IP68 waterproof and dustproof for permanent exterior mounting.
- Configurable for left or right side (cut the white loop to switch), so you can run one each side for full coverage.
- Full HD 1080p with a 126° view; accepts an optional F100EX6M 6m extension for longer runs.
Compatibility & installation
Connects through the Thinkware Multiplexer Module and works with compatible cameras including the U1000 Plus, Q200, F790 and T700. Some cameras need a model-specific adaptor (for example MULU1000 for the U1000 Plus) — ask us and we'll confirm what your setup needs.
Specifications
| Resolution | Full HD 1920 × 1080 @ 30fps |
| Image sensor | 2.12MP CMOS |
| Field of view | Approx. 126° diagonal |
| Weatherproofing | IP68 waterproof & dustproof |
| Mounting | Left or right side (cut white loop to switch) |
| Cable length | 4.4m total (1.4m fixed + 3m extension); optional 6m extension |
| Dimensions | 29 × 45 × 26mm |
| Operating temperature | −10°C to 60°C |
| Warranty | 12-month Australian accessory warranty |
What's in the box
MULTSC side camera with 1.4m fixed cable, 3m extension cable and mounting bracket. Requires the Thinkware Multiplexer Module (sold separately).
- Genuine Thinkware accessory from an authorised Australian reseller, with a 12-month Australian warranty and your full rights under Australian Consumer Law
- Same-day dispatch on orders placed before 1pm AEST, Monday to Friday
- Free Express Post Australia-wide on orders over $200, tracked with signature on delivery
- Honest, expert local support before and after you buy — we only sell dash cams, so we know them inside out
What does a side camera cover?
The areas alongside the vehicle that front and rear cameras can't see — kerbs and posts when parking, cyclists and traffic beside you, and the flanks of wide 4WDs, trucks and vans. Run one on each side for full coverage.
Can I mount it on either side?
Yes. The MULTSC is configurable for left or right mounting — you cut a small white loop on the cable to set the side, so a pair can cover both flanks.
Do I need the multiplexer?
Yes — side cameras are add-on channels, so they connect through the Thinkware Multiplexer Module as part of a 3, 4 or 5-channel system.
Is it tough enough for off-road?
It's IP68 waterproof and dustproof, so it's built to sit on the outside of a 4WD or truck through mud, dust and rain.
Add one or two MULTSC side cameras, then pair them with the Multiplexer Module and a compatible Thinkware camera. Ask our team to spec your build.